Recommended Flow: Up to 380 lpm, Max Torque (Nm) @ 240 bar: 51985, Motor: Radial Piston, Pressure Valve Fitted: Included, Energy Control Valve: Optional, Case Drain Required: Yes (Included), Max Pressure: Do not exceed 240 bar @ 380 lpm, Max Flow: Do not exceed 380 lpm @ 240 bar, Max Continuous Power: Do not exceed 150 Kw (201 hp), Overall Length (mm): 1493, Diameter (mm): 600, Weight (No linkage and hitch): 836, Output Shaft: 100mm Square, Swing Control (SCS): N/A, Diggalign (Auger Alignment): Optional, Recommended Auger: 10 & 11 Series, Max Recommended Dia Fract. Rock*: 1500, Max Recommended Dia Clay/Shale*: 1500mm, Max Recommended Dia Earth*: 1800mm. *Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Warranty
SD50 Drives carry a 1 year gearbox warranty, 1 year motor warranty and 1 year manufacturer warranty from Digga which covers defects in materials and workmanship
Warranty Guidlines
Warranties are subject to approval from Grease Works & Digga
Warranty repairs are not to be carried out without pre-approval from Grease Works & Digga
Maintenance must be carried out as per the operator's manual to maintain warranty
Do not disassemble a Digga product before getting approval and instructions from Digga
Ensure attachments are utilised only for their intended use.
If you have a problem with any of your product and you believe they are covered by warranty please contact Grease Works
Shipping
The SD50 two speed drilling auger drives for high flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It's like having 2 drive units in 1. Digga's SD two speed drive range for drilling suits large excavators & truck cranes 30-50t with flows up to 380lpm.This unit has 100mm square hub and does not include hoses. Check the specifications table to see if this drive unit is suitable for your machine.
